SMT Spare Parts
SMT Equipments
SMT Peripherals
ESD Products
Company News
How to clean and maintain the SMT nozzles
The nozzle of the placement machine is not only a key part for the placement and placement of the sucked components, but also the background for the camera of the optical vision system to take pictures. Due to long-term use or improper operation, the nozzle may be blocked, which will affect the working efficiency and placement quality of the placement machine. Below we share the cleaning and maintenance methods of SMT placement machines.
- IES Testing Capability
- Accurate Optical Data
Manual cleaning
Use a cotton swab dipped in a small amount of alcohol to gently rotate the front and back sides of the nozzle hole 8 times each to remove accumulated dust and impurities. 2. Through hole: Use a fine needle to dredge the nozzle hole, ensure that the hole is unobstructed, and remove any foreign matter on the hole wall. 3. Blow: Use an air gun to blow air at the nozzle hole for 10 seconds to blow away any remaining dust or debris.
Contact us
Using nozzle cleaning machine
Nozzle cleaning machine is a common and effective method for cleaning nozzles. Place the nozzle in a dedicated ultrasonic cleaning machine and use the tiny bubble bursting effect generated by ultrasonic vibration to deeply remove dust, impurities and sticky residues inside the nozzle. Ultrasonic cleaning can thoroughly clean the internal structure of the nozzle and restore its vacuum performance without damaging it.
Contact us